丙烯酸球场讲解丙烯酸球场七个施工标准

1、温度:施工时温度应在12℃以上，丙烯酸球场涂料易于熟化，而超过36℃涂料则易起泡。

1, the construction temperature: the temperature is over 12 DEG C, stadium acrylic paint is easy to aging, and more than 36 ℃ coating blister.

2、试水:全场洒水，以测试场地之平整度，在明显凹陷处做记号。

2, to test the waters: the sprinkler, to test the flatness of the ground, mark the obvious depression.

3、修补:用强化沥青填充剂拌适量石英砂和水，填平场内凹陷处，减低积水现象。

3, repair: reinforced asphalt filler mix appropriate amount of quartz sand and water filled depressions, floor, reduce the phenomenon of water.

4、划线:用丙烯酸球场色料浓缩物画白色标准球场界线两道。

4, marking: Stadium acrylic pigment concentrates painted white standard pitch line two.

5、面层:用丙烯酸色料浓缩物混合适量石英砂和水搅拌，涂刮二层，以增加丙烯酸球场的耐磨功能。

5, the surface layer: mixing appropriate amount of quartz sand and water with acrylic pigment concentrates, scraping two layers, with wear-resisting function increased acrylic stadium.

6、中层:用丙烯酸球场强化填充剂混合砂、水，搅拌后涂刮一层，以加强面层与底层的粘接。

6, middle: acrylic stadium reinforcing filler mixed sand, water, stirring after coating a layer, in order to strengthen the bonding surface layer and the bottom layer.

7、底层:用强化沥青填充剂掺砂、水搅拌，铺涂二层找平地面，使其与丙烯酸球场面层涂料更粘合。

7, the bottom: mixing with reinforced asphalt filler sand, water, PU coated with two layers of leveling the ground, and the acrylic ball scene more adhesive coating.