丙烯酸球场讲解工业地坪标准及处理办法

1、 为使涂装达到完美效果，我公司建议：对于尚未找平的地面我公司参与工地的水泥找平层的找平处理。土建方找平时，在水泥初凝时用我公司专业地面机械对地面进行磨平处理。在此基础上所做的环氧涂装层的表面效果会更平整、光亮，使用寿命也会提高。

1, in order to make the painting to achieve the perfect effect, I suggest: leveling cement screed for not leveling the ground my participation in the site. Construction for peacetime, to ground polished processing in jelling with my company specializes in mechanical ground. The effect of the surface of the epoxy coating on this basis will be more smooth, bright, life will improve.

2、 待水泥层干燥后（大约 28 天），用打磨机对地面进行整体打磨处理，使其表面平整，水泥毛细孔全部张开。

2, when the cement layer is dried (about 28 days), on the ground of whole polished by grinding machine, the surface smooth, cement pores fully open.

3、 对于水泥地面有油污（食用油、机油），先用专用洗剂冲洗地表面，反复擦洗，直到无油污为止。

Oil 3, for the cement ground (edible oil, oil), first flush using special lotion to the surface, repeated scrubbing, until no oil.

4、 对于地坪碱性太大（ PH>8 ）的，先用专用材料中和，然后用清水冲洗；

4, the floor too alkaline (PH>8), first with special material and, then rinse with water;

5、 对于潮湿的地面，通过吸水。擦干，太阳灯照，热风机吹烘、烧，使其干燥达到施工要求。

5, for the wet ground, through the water. Dry, sun light, hot air blowing drying, burning, dry meet construction requirements.

6、 对于有旧油漆的地面（如金刚砂地面、旧油漆地面），先用专用机械铲除旧油漆，然后对不良水泥、金刚砂地面进行处理同时对地面打毛。地面经过这样处理后，不牢固的旧水泥及金刚砂表面被清除掉，并且形成粗毛面，从而提高新涂层的附着力，提高涂装地坪的使用寿命。

6, for the old paint surface (such as carborundum floor, old paint surface), first with the machinery for the eradication of the old paint, then the bad cement, emery ground processing at the same time on the ground dozen hair. The ground after this treatment, not solid old cement and sand surface is removed, and the formation of rough surface, so as to improve the coating adhesion, improve the service life of the coating.